Kenwood KDC-BT7539U 39

USB ERROR (Blink):

Some trouble may have occurred to the connected USB device.

➪Remove the USB device, then cycle the power switch to ON. If the same display is repeated, use another USB device.

iPod Error:	Connection to the iPod has failed.
	➪ Check that the connected iPod is an iPod
	that is supported. See <About Audio file>
	(page 30) for information on supported
	iPods.
	➪ Remove the USB device and then
	reconnect it.
	➪ Confirm that the software for the iPod is
	the latest version.
USB REMOVE:	The Remove mode has been selected for the
	USB device/iPod. You can remove the USB
	device/iPod safely.
No Number:	• The calling party does not notify a caller ID.
	• There is no phone number data.
No Data:	• There is no outgoing call list.
	• There is no incoming call list.
	• There is no missed call list.
No Entry:	The cell-phone has not been registered
	(pairing).

HF Disconnect:

The unit cannot communicate with the cell- phone.

Audio Disconnect:

The unit cannot communicate with the audio player.

HF Error 07:	The memory cannot be accessed.
	➪ Turn off the power and on again. If this
	message still appears, press the reset
	button on the control unit.
HF Error 68:	The unit cannot communicate with the cell-
	phone.
	➪ Turn off the power and on again. If this
	message still appears, press the reset
	button on the control unit.
Unknown:	The Bluetooth device cannot be detected.
Device Full:	5 Bluetooth device have already been
	registered. No more Bluetooth device cannot
	be registered.
PIN Code NG:	The PIN code is wrong.
Connect NG:	The unit cannot be connected to the device.
Pairing Failed:	Pairing error.

Err No Matching:

The voice tag is wrong. Voice cannot be recognized because of an unregistered voice tag, etc.

Too Soft:	Voice is too small and cannot be recognized.
Too Loud:	Voice is too large to be recognized.
Too Long:	The word or utterance is too long to be
	recognized.
No Phonebook:
	Data is not contained in the phone book.
No Message:	No short message in In Box.
No Voice Data:	The voice tag is not registered in the
	phonebook.
Memory Full:	The number of voice tags reaches the
	maximum number to be registered in the
	phonebook.

English 39

Contents

Page Basic Operations of remote control Accessories/ Installation Procedure 2WARNING To prevent injury or fire, take the following precautions: Before using this unit for the first time How to reset your unit Cleaning the Unit [SRC] Release [ATT] Disc slot [AUTO] [ ] [FNC] Function Control [FNC] Category Function of setup item Text/Title scroll Control knob Tuner functions Item Setting Entry Setting overview Entry Setting overview Enter Function Control mode Press the [FNC] button 2Select your desired setup item Operation type 3Make a setting 4Exit Function Control mode Text Display Selection In Tuner source Information In CD & External disc source In Audio file source Station/Disc Naming (SNPS/DNPS) 1Receive/play the station/disc you want to attach a title to 2Select Name set mode item during Menu mode 3Enter Name set mode 4Enter the name Music Select 2Search for music Select the category item using the Control knob iPod source (“iPod Mode : ON”) Other source Station Preset Memory 2Enter Preset Memory mode Select “P.MEM” 3Select the number to put in the memory Turn the Control knob 4Determine the number to put in the memory Press the Control knob 5Allow the determined number to take effect Press the Control knob Receiving a call Answering a Phone Call Press the [AUD] knob Rejecting an Incoming Call Call waiting Making a call 1Enter dialing method mode 2Select a dialing method Press the Control knob 3Exit the dialing method mode Dial a number Calling a number in the call log Make a voice dialing call Selecting Bluetooth Audio source Pause and play Music Search Security Code 1Select Security Code item during Menu mode (In Standby mode) 2Enter Security Code mode 3Enter Security Code 4Confirm the Security Code Manual Clock Adjustment 1Select Clock Adjustment item during Menu mode (In Standby mode) 2Enter Clock adjustment mode Press the Control knob for at least 1 second. The clock display blinks 3Adjusting Clock Audio Control Range 1Select the source to adjust 2Enter Audio Control mode Press the [AUD] knob 3Select the Audio item to adjust Press the [AUD] knob Speaker Setting Speaker type 1Enter Standby 2Enter Speaker Setting mode Press the [AUD] knob 3Select the Speaker type Turn the [AUD] knob Audio Preset Recall 1Select the source 4Select the Audio Preset Recall Turn the Control knob 5Determine whether to recall the Audio Preset Press the Control knob 6Recall the Audio Preset Registering Bluetooth device When registering from Bluetooth devices 1Turn on the control unit 2Start registering a unit by operating the Bluetooth device 3Enter a PIN code Registering PIN Code 1Select PIN code edit item during Menu mode (In Standby mode) 2Enter PIN code edit mode 3Input the PIN code 4Register a PIN code Selecting the Bluetooth device You Wish to Connect 1Select Bluetooth device selection item during Menu mode Cell-phone Audio player 4Set up the Bluetooth device Adding a voice dialing command 1Enter voice tag mode Select “BT” > “VOICE” > “NAME” 2Search for the name to register 3Select a mode Downloading the SMS 3Exit the SMS download mode Press the [FNC] button SMS (Short Message Service) When a new message arrives Displaying the SMS Selecting TV source Select the TV band and Video input Push the Control knob toward up Select the TV channel Preset Memory In Tuner source Band select [FM]/[AM] Station select [4]/[¢] Hands-freephone control Making a call Enter the dialing method selection mode Select a dialing method Number dial input About Audio file About USB device About KENWOOD “Music Editor” of PC application About the Cell-Phone About the Bluetooth Audio player Menu Glossary The marking of products using lasers (Except for some areas) About CD players/disc changers connected to this unit For Good Reception Page non-Japanesecars Japanese cars Removing the hard rubber frame Removing the Unit Installation the Microphone Unit General Tuner source Disc source Audio file source Hands-free Bluetooth audio source The messages shown below display your systems condition Page FM tuner section AM tuner section Bluetooth section CD player section USB Interface