Audio Adjustments

Speaker Setting

Fine-tuning so that the System Q value is optimal when setting the speaker type as follows;

Speaker type

 

Display

OFF

 

 

“OFF”

For 5

& 4 in. speaker

 

“5/4inch”

For 6

& 6x9 in. speaker

 

“6x9/6inch”

For the OEM speaker

 

“O.E.M.”

1Enter Standby

Select the “STANDBY” display.

For how to select source item, refer to <Power/ Source Select button> of <Basic Operation> (page 4).

2Enter Speaker Setting mode Press the [AUD] knob.

“SP SEL” is displayed.

3Select the Speaker type Turn the [AUD] knob.4Exit Speaker Setting mode Press the [AUD] knob.
Audio Preset Memory

Registering the value setup by Sound Control. The memory cannot be erased by the Reset button.

1Setup Sound Control

Refer to the following operations to setup the Sound Control.

-<Audio Control> (page 19)

-<Audio Setup> (page 19)

2Select Audio Preset item during Menu mode (Other than Standby mode) Select the “Audio Preset” display.

For how to select Function Control items, refer to <Function Control> (page 6).

3Enter Audio Preset mode

Press the Control knob for at least 1 second.

4Select the Audio Preset Memory Turn the Control knob.

Select the “Memory” display.

5Determine whether to put the Audio Preset in the memory

Press the Control knob. “Memory?” is displayed.

6Put the Audio Preset in the memory Select “YES” using the Control knob. Press the Control knob.

“Memory Completed” is displayed.

7Exit Audio Preset mode Press the [FNC] button.

⁄

•Register 1 pair of Audio Preset Memory. You cannot register by the source.

•When you press the Reset, all the sources will be the setting value which is registered.

•The following items cannot be registered.

Volume, Balance, Fader, Loudness, Volume offset, Dual Zone System, Rear Volume

20 KDC-BT7539U