Kenwood KDC-DAB4551U, KDC-DAB41U Selecting the Bluetooth Device, Setting a Voice Command

Selecting the Bluetooth Device

1Press and hold the volume knob to enter Bluetooth mode.

2Turn the volume knob to select [SETTINGS], then press to enter.

3Turn the volume knob to select [PAIRING], then press to enter.

4Turn the volume knob to select [PHONE SELECT] or [AUDIO SELECT], then press to enter.

5Turn the volume knob to select a Bluetooth device name.

6Press the volume knob to set up the Bluetooth device.

■“✱(Device name)”: The selected Bluetooth device is busy.

■“-(Device name)”: The selected Bluetooth device is on standby.

■“ (Device name)“: The Bluetooth device is deselected.

■If a cell-phone is already selected, deselect it, and then select a different one.

7Hold to finish the procedure.

■To exit Bluetooth mode, press SRC.

Setting a Voice Command

Registering Phone Book Name

1Press and hold the volume knob to enter Bluetooth mode.

2Turn the volume knob to select [SETTINGS], then press to enter.

3Turn the volume knob to select [VOICE TAG], then press to enter.

4Turn the volume knob to select [PB NAME EDIT], then press to enter.

5Search for the Phone Book name to register

Select the name to register with reference to 5 in <Calling a Number in the Phone Book> (page 19).

If a voice tag has already been registered for a name, “*” is displayed before the name.

6Turn the volume knob to select [PB NAME REG], then press to enter.

■To select “PB NAME CHK”, play the registered voice.

■To select “PB NAME DEL”, delete a voice tag. Turn the volume knob to select “YES”, then press to confirm.

7“ENTER 1” is displayed. When a beep is heard, say a voice tag within 2 seconds.

8“ENTER 2” is displayed. When a beep is heard, say the same voice tag as that you said in step 7 within 2 seconds. “COMPLETE” is displayed.

9Press the volume knob to return to step 5.

■To exit Setting mode, press .

■To exit Bluetooth mode, press SRC.

■You can register up to 35 voice tags.

■Audio sound is not output during voice tag registration.

Registering Phone Book Name Type

1Press and hold the volume knob to enter Bluetooth mode.

2Turn the volume knob to select [SETTINGS], then press to enter.

3Turn the volume knob to select [VOICE TAG], then press to enter.

4Turn the volume knob to select [PN TYPE EDIT], then press to enter.

5Turn the volume knob to select [GENERAL], [HOME], [OFFICE], [MOBILE], or [OTHER], then press to enter.

6Turn the volume knob to select [PN TYPE REG], then press to enter.

■To select “PN TYPE CHK”, play the registered voice.

■To select “PN TYPE DEL”, delete a voice tag. Turn the volume knob to select “YES”, then press to confirm.

7“ENTER 1” is displayed. When a beep is heard, say a voice tag within 2 seconds.

Continued to next page

English 23