Amplifier G
Antenna film F

7Match the protrusion of the amplifier G with the 5 on the antenna film F and paste.

Do not touch the feeder terminal or the pasting surface (adhesive side) of the amplifier.

When installing the antenna on the right side

Match the protrusion with 5

Earth sheet

Antenna film

F Amplifier G

When installing the antenna on the left side

Amplifier G

Earth sheet

Match the protrusion with 5

8Remove the film covering the earth sheet and paste the earth sheet on the metal part of the vehicle.

Provide sufficient leeway for the earth sheet so that it does not interfere with the interior parts (front pillar cover).

Also take care that the interior parts do not interfere with the amplifier G.

Front glass

Front pillar

Interior part

Earth sheet

9Wire the antenna cables.

Use cord clamper H to secure the antenna to the pillar at several locations.

Notes

Take the following precautions when passing the antenna cable inside the front pillar where the air bag is installed.

Install the amplifier part of the antenna cable in front or above the air bag so that the antenna and the air bag do not interfere.

Amplifier G

Air bag

Front pillar

The front pillar cover is secured with a special clip which may need to be replaced when the front pillar cover is removed.

Contact your vehicle dealer for details on replacing the front pillar cover and availability of replacement parts.

Interior part

Clip

Select the DAB antenna power

Set ”INITIAL SET” > “DAB ANT POWER” to “ON” in STANDBY mode. (page 7)

36 English

Page 36
Image 36
Kenwood KDC-DAB41U Interior part Clip, Select the DAB antenna power, Set Initial SET DAB ANT Power to on in Standby mode