Kenwood KDC-DAB41U, KDC-DAB4551U instruction manual Function settings

Function settings

1PressSRC to select a source other than “STANDBY”.

2Press the volume knob to enter [FUNCTION] mode.

3Turn the volume knob to select [AUDIO CONTROL] or [SETTINGS], then press to enter.

4Turn the volume knob to make a selection, then press to confirm.

■See table below for selection.

■Repeat step 3 until the desired item is selected/activated.

■Pressto return to the previous item.

5Holdto finish the procedure.

[AUDIO CONTROL] : While listening to any source except in STANDBY state or Bluetooth mode.

	Item	Selectable setting (Preset: *)
SUB-W LEVEL		–15 — 0 * — +15: Adjusts the subwoofer output level.
BASS BOOST		B.BOOST LV1 */ B.BOOST LV2: Selects your preferred bass boost level. ; OFF: Cancels.
SYSTEM Q		NATURAL */ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ GAME: Selects a preset sound mode suitable to the
		music genre. (Selects [USER] to use the customized bass, middle, and treble settings.)
BASS ADJUST
	BASS CTR FRQ	60/ 80/ 100 */ 200: Selects the center frequency.
	BASS LEVEL	–8 — 0 * — +8: Adjusts the level.
	BASS Q FACTOR	1.00 */ 1.25/ 1.50/ 2.00: Adjusts the quality factor.
	BASS EXTEND	ON: Turns on the extended bass. ; OFF *: Cancels.
MID ADJUST
	MID CTR FRQ	0.5K/1.0K */ 1.5K/ 2.5K: Selects the center frequency.
	MID LEVEL	–8 — 0 * — +8: Adjusts the level.
	MID Q FACTOR	0.75/ 1.00 */ 1.25: Adjusts the quality factor.
TRE ADJUST
	TRE CTR FRQ	10.0K/ 12.5K */ 15.0K/ 17.5K: Selects the center frequency.
	TRE LEVEL	–8 — 0 * — +8: Adjusts the level.
BALANCE		L15 — 0 * — R15: Adjusts the left and right speaker output balance.
FADER		R15 — 0 * — F15: Adjusts the rear and front speaker output balance.
SUBWOOFER SET		ON *: Turns on the subwoofer output. ; OFF: Cancels.
DETAILED SET
	LPF	THROUGH *: All signals are sent to the subwoofer. ; 85/120/160 (HZ): Frequencies higher than the specified
	SUBWOOFER	value are cut off.
	SUB-W PHASE	REVERSE (180°)/ NORMAL (0°) *: Selects the phase angle of the subwoofer output to be in line with the
		speaker output for optimum performance. (Selectable only if a setting other than [THROUGH] is selected for
		[LPF SUBWOOFER].)
	SUPREME SET	ON *: Creates realistic sound by interpolating the high-frequency components that are lost in AAC/ MP3/
		WMA audio compression. ; OFF: Cancels. (Selectable only when playback an AAC/ MP3/ WMA disc or a USB
		device, except iPod.)

28 English