8 English
Listening to the DAB1 Press SRC to select “DAB”.
2 Press BAND repeatedly to select a band
(DB1, DB2, DB3).
3 Press and hold 4 / ¢ to search for an
ensemble.
4 Press 4 / ¢ to select an ensemble,
service or component to listen.
■Press ¢ to receive ensemble, then selec t
service > component in sequence. When
4 is pressed, primary service is selected
when ensemble changes and primary is
selected when service changes.
EnsembleEnsemble
Service Service
Primary Primary
Secondary Secondary
Service Service
Service Service
: Press
4
.
: Press
¢
.
Selecting a service
• The ser vice list information must be obtained
first.
1 Press DAB to enter Service Search mode.
“SERVICE LIST” appears.
LIST
UPDATE
■Hold for about 2 se conds to memorize the current
service or the selected Program Type. (Refer to [PTY
SEARCH] on the table below to select the Program
Type.)
■Press brief ly to recall memorized service (or Progr am
Type after entering the PTY search mode).
■Changes to DAB source if other than
DAB source has been selected.
■Press brief ly to enter DAB service
search mode
■Updates DAB search list information
or stops update if pressed and held.
Hold to turn on or off the Traffic Information function.
2 Turn the volume knob to select a service,
then press to confirm.
■To skips character, press 4/ ¢.
■To cancel the Service Search mode, press
and hold .
■“NO LIST” is displayed w hen no service list
is obtained.
Alphabet Search for service
1 Press DAB to enter Service Search mode.
“SERVICE LIST” appears.
2 Press to enter alphabet search mode.
“< ABCDEFG >” appears.
3 Turn the volume knob to select the
character to be searched for.
■To move to the next row, press BAND.
■To skips character, press 4/ ¢.
4 Press the volume knob to start searching.
■To return to the Service Search mode, press
.
■To cancel the Service Search mode, press
and hold .
■To search for a character other than A to Z
and 0 to 9, enter only “ * ”.
Updating Service List information
Press and hold DAB to start Service list
update.