Kenwood KDC-DAB41U Operation of Hands-Free Phoning, Pairing Registering from Bluetooth devices

Operation of Hands-Free Phoning

Preparation : Only with the optional accessory KCA-BT300 or KCA-BT200 connected.

LIST

UPDATE

■Press and hold to enter Bluetooth mode.

■Press to answer an incoming call.

■Press and hold for about 2 seconds to memorize the current phone number.

■Press briefly to recall memorized phone number.

Getting Started

Before use the Bluetooth device, you need to connect Bluetooth device to this unit. The following 3 steps procedure is necessary.

Step 1. Pairing (Registering from Bluetooth devices)

1PressSRC to turn on the power.

2Start registering this unit by operating the Bluetooth device.

By operating the Bluetooth device, register the hands-free unit (pairing). Select “KCA- BT300” or “KCA-BT200” from the list of connected units.

3Input the PIN code (“0000”) in the Bluetooth device.

Check that registration is complete on the Bluetooth device. PIN code is set to “0000” as the default. You can change this code. Refer to [PIN CODE EDIT] under <Bluetooth Setup> (page 24).

4By operating the Bluetooth device, start hands-free connection.

Step 2. Connection

If you have registered 2 or more cell- phones, you need to select one of them. For more details, see <Selecting the Bluetooth Device> (page 23).

When a cell-phone is connected, the “BT” indicator lights up.

Step 3. Hands-free phoning

You can do hand-free phoning when the connection is made.

■When registering from this unit. Refer to <Registering Bluetooth Device (Pairing)> (page 22).

■For details on the Bluetooth cell-phone with the hands-free function, see <About the Cell-Phone> (page 25).

18 English