Determining the antenna installation location
When installing the antenna on the left side | When installing the antenna on the right | |
Front pillar | side | |
Amplifier G | ||
| ||
| Earth sheet | |
150 mm | 150 mm | |
Earth sheet |
| |
70 mm *1 | Antenna film F | |
| ||
Antenna film F | 70 mm *1 | |
Amplifier G |
|
• *1 Where the earth sheet of Amplifier Gcan be pasted on the metal part of the front pillar.
Antenna Installation
1Check the installation location.
2Wipe the area where antenna film F, amplifier unit G, and earth sheet are pasted with the included cleaner I.
The coating on the metal surface need not be removed.
■Wait until the glass surface is completely dry before pasting.
■If the glass surface is cold, such as during winter, warm it with defroster or dryer.
3Remove the separator (tag I) of antenna film F horizontally and paste the antenna on the front glass.
■Remove the separator gently.
■Do not touch the pasting surface (adhesive side) of the antenna film F.
4Remove the separator (tag II) of antenna film F vertically and paste the antenna gently while applying pressure.
5After pasting, rub the element in the glass surface in the direction of the arrow shown in the figure to bond it.
6Remove the application film (tag III).
■Do not touch the feeder terminal of the element. Also, do not apply any glass cleaner.
Feeder terminal
Continued to next page
English 35
