Kenwood KDC-MP642U, KDC-X693, KDC-X993 Display, Make a call, Information, 4Make a call, Press the [] button, 3“PN Type” is displayed, Make a voice dialing call, Exit the Preset Memory mode

Make a voice dialing call

1Enter voice recognize mode Select “BT” > “Voice Recognize”.

For how to select Function Control item, refer to <Function Control> (page 6).

“Ready” is displayed.

2Press the Control knob. “PB Name?” is displayed.

When a beep is heard, utter the name within 2 second.

3“PN Type” is displayed.

When a beep is heard, utter the category within 2 second.

4Make a call

Press the Control knob for at least 1 second.

•This step is the same as step 3 of the procedure in <Calling a number in the Phone Book>. You can make a call or select a category.

⁄

•If your voice cannot be recognized, a message is displayed. Pressing the Control knob allows you to retry voice input. (page 54)

•Both the name and category requires registration of a voice tag. (page 39)

•Audio sound is not output during voice recognize.

Registering to the Preset Dial Number List

1Enter the phone number you wish to register Enter the phone number with reference to the following:

Dial a number/ Calling a number in the call log/ Calling a number in the Phone Book

2Enter Preset Memory mode Press the [] button.

3Select the number to put in the memory Turn the Control knob or push it towards up or down.

4Determine the number to put in the memory Press the Control knob for at least 1 second.

Exit the Preset Memory mode

Press the [] button.

Display of phone number type (category)

The category items in the Phone Book are displayed as follows:

Display						Information
“GENERAL” /“					”	General
“HOME” /“	”					Home
“OFFICE” /“			”			Office
“MOBILE” /“				”		Mobile
“OTHER” /“		”				Other

English 23