Press the Control knob for at least 1 second.

The current setting of PIN code is displayed.

3Input the PIN code

Operation type

 

Operation

Select the numbers.

 

Turn the Control knob or push it towards

 

 

up or down.

Move to the next digit.

 

Push the Control knob towards right.

Delete the last digit.

 

Push the Control knob towards left.

4Register a PIN code

Press the Control knob for at least 1 second. If “Completed” is displayed, registration is completed.

5Exit PIN code edit mode Press the [FNC] button.

⁄

•By default, “0000” is specified.

•A PIN code can be specified with up to eight digits.

Downloading the Phone Book

Download the phone book data from the cell- phone to this unit so that you can use the Phone Book of this unit.

To download automatically

If the cell-phone supports a phone book synchronization function, the phone book is downloaded automatically after Bluetooth connection.

⁄

•Setting on the cell-phone may be required.

•If no phone book data is found in the unit even after the compete display, your cell-phone may not support automatic download of phone book data. In this case, try downloading manually.

To download from the cell-phone manually1By operating the cell-phone, end the hands-free connection.2By operating the cell-phone, send the phone book data to this unit

By operating the cell-phone, download the phone book data to this unit.

•During downloading: “Downloading” is displayed.

•After completion of downloading: “Completed” is displayed.

3By operating the cell-phone, start the hands- free connection.To clear the downloading completion message Press any button.

⁄

•Up to 1000 phone numbers can be registered for each registered cell-phone.

•Up to 32 digits can be registered for each phone number along with up to 50* characters representing a name.

(* 50: Number of alphabetic alphabetical characters. Fewer characters can be input depending on the type of characters.)

•To cancel downloading of the phone book data, operate the cell-phone.

Selecting the Bluetooth device You Wish to Connect

When two or more Bluetooth devices have already been registered, you need to select the Bluetooth device you wish to use.

1Select Bluetooth device selection modeCell-phoneSelect “MENU” > “Phone Selection”.Audio playerSelect “MENU” > “Audio Selection”.

For how to select Function Control item, refer to <Function Control> (page 6).

2Enter Bluetooth device selection mode Press the Control knob for at least 1 second. “(name)” is displayed.

3Select the Bluetooth device Turn the Control knob.4Set up the Bluetooth device

Push the Control knob towards right or left. ‘✱(name)’ or ‘-(name)’ is displayed.

“✱”: The selected Bluetooth device is busy.

“-”: The selected Bluetooth device is on standby.

“ “ (blank): The Bluetooth device is deselected.

5Exit Bluetooth device selection mode Press the [FNC] button.

⁄

•If a cell-phone is already selected, deselect it, and then select a different one.

•If you cannot select a device using the audio player, connect the device with the audio player.

English 37