Kenwood KDC-MP642U, KDC-X693, KDC-X993 Display, Operation, Select a mode, 4Select a mode, Turn the Control knob, Press the [FNC] button, Exit Phonebook name edit mode

Select “PB Name Delete” (Delete)

5Delete a voice tag Press the Control knob.

6Turn the Control knob to select “YES”, and then press the Control knob.Exit Phonebook name edit mode

Press the [FNC] button.

⁄

• Audio sound is not output during voice tag registration.

Setting a Voice Command for Category

Add a voice tag to the phone number category (type) for voice calling.

1Select Phone Number type edit mode Select “BT” > “Voice Tag” > “PN Type Edit”. For how to select Function Control item, refer to <Function Control> (page 6).

2Enter Phone Number type edit mode Press the Control knob.

3Select the category (type) you wish to set Turn the Control knob and push the center when the desired category name is displayed. “General”/ “Home”/ “Office”/ “Mobile”/ “Other”

4Select a mode

Turn the Control knob.

Display	Operation
“PN Type Regist”	Register a voice tag.
“PN Type Check”*	Play a voice tag.
“PN Type Delete”*	Delete a voice tag.
“Return”	Return to step 2.

*Displayed only when a name for which a voice tag has been registered is selected.

5Register the category (type) by performing steps 5 to 7 in <Adding a voice dialing command> (page 38).

6Exit Phone Number type edit mode Press the [FNC] button.

⁄

•Set the voice tag for all the 5 categories. If the voice tag is not registered for all the categories, the Phonebook may not be recalled by voice command.

English 39