Kenwood KDC-MP642U, KDC-X693, KDC-X993 Range, Range, Display, Display, Audio Setup, Audio Control, 5Exit Audio Setup mode, 2Enter Audio Setup mode, 4Exit Audio Control mode Press any button

Audio Adjustments

Audio Control

You can adjust following Audio Control items;

Adjustment Item	Display	Range
Rear volume	“REAR VOLUME”	0 — 35
Subwoofer level	“SUBWOOFER LEVEL”	–15 — +15
Balance	“BALANCE”	Left 15 — Right 15
Fader	“FADER”	Rear 15 — Front 15

Exit Audio Control mode (Volume control mode)

1Enter Audio Control mode Press the [AUD] knob.2Select the Audio item to adjust Press the [AUD] knob.3Adjust the Audio item Turn the [AUD] knob.4Exit Audio Control mode Press any button.

Press a button other than the [AUD] knob or [0] button.

Audio Setup

You can set Sound system , such as follows;

Adjustment Item	Display	Range
Volume offset	“VOL-OFFSET”	–8 — ±0 (AUX: -8— +8)
Dual Zone System	“2 ZONE”	OFF/ON

⁄

•Volume offset: Sets each source’s volume as a difference from the basic volume.

•Dual Zone System

Main source and sub source (Auxiliary input) output Front channel and Rear channel separately.

-Set up the channel of sub source by “ZONE2” of <Function Control> (page 6).

-Select Main source by [SRC] button.

-Adjust the volume of Front channel by [AUD] knob.

-Adjust the volume of Rear channel by <Audio Control> (page 28) or [5]/[∞] button on the remote control

(page 43).

-The Audio Control has no effect on sub source.

1 Select the source to adjust Press the [SRC] button.

2Enter Audio Setup modePress the [AUD] knob for at least 1 second.3Select the Audio Setup item to adjust Press the [AUD] knob.4Adjust the Audio setup item Turn the [AUD] knob.5Exit Audio Setup mode

Press the [AUD] knob for at least 1 second.

28 KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U