Appendix

Menu Glossary

•AMP

Selecting “OFF” turns off the built-in amplifier. Turning off the built-in amplifier improves the quality of the sound from Preout.

•Auto Answer (Setting the Time Interval for Automatic Answer)

This function automatically answers (responds to) a call after lapse of the preset time interval for automatic answer.

“OFF” : Does not answer the phone call automatically.

“0” : Automatically answers the phone call at once.

“1s” – “99s” : Automatically answers the phone call after lapse of 1 – 99 seconds.

⁄

•If the time set in the cell-phone is shorter than that set in the unit, the former will be used.

•This function does not work for call waiting.

•Call Beep (Setting the Beep of the Incoming Call) You can output a beep from the speaker when a call comes in.

“ON” : Beep is heard.

“OFF” : Beep is canceled.

•CD Read

Sets the method for reading CD.

When unable to play special format CD, set this function to “2” to force playing. Note that some music CD may be unplayable even when set to “2”. In addition, audio files cannot be played when set to “2”. Normally, keep this set to “1”.

1 : Automatically distinguishes between audio file disc and music CD when playing disc.

2 : Forces playing as music CD.

•Display

If this unit is not operated at least 5 seconds with “OFF” selected, the display turns off. During a setup mode, the display will not turn off even if 5 seconds lapse.

•DISP DIM (Display illumination dimmer) Reduces the display Illumination brightness. AUTO: Dims the illumination in conjunction with

the Light switch of the vehicle. MNAL1: Dims the illumination constantly. MNAL2: Dims the illumination darker than MNA1. OFF: Does not dim the illumination.

•DISP N/P

Switches the panel display between positive or negative. In addition, you can reverse it in conjunction with the interior light.

POSI1 : Displays the text in the positive.

POSI2 : When the interior light is off, the text is displayed in the positive; when the interior light is on, the text is displayed in the negative.

NEGA1 : Displays the text in the negative.

NEGA2 : When the interior light is off, the text is displayed in the negative; when the interior light is on, the text is displayed in the positive.

•DTA (Digital Time Alignment)

Make fine adjustment of the delay time of the speaker output specified at <Cabin selection> (page 29) to have a more suitable environment for your vehicle.

The settings of the delay time are automatically identified and compensated by specifying the distances of each speaker from the center of the vehicle interior.

1 Set the front and rear positions and the height of the reference point to the position of the ears of the person sitting in the front seat, and set the right and left positions to the center of the vehicle interior.

2 Measure the distances from the reference point to the speakers.

3 Calculate the distance difference in accordance with the farthest speaker.

 

 

+3.2 feet

FRONT

 

FRONT

 

 

1.7 feet

 

 

2.6 feet

REAR

 

REAR

 

4.9 feet

+2.3 feet

 

 

 

 

+0 feet

 

 

SUB-W

48 KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U