Kenwood KDC-MP642U, KDC-X693, KDC-X993 51

Connecting Wires to Terminals

To USB device

USB connector (1m)

⁄Do not remove the cap when you do not use the USB cable. The connector will cause the unit to malfunction if it gets in touch with any metallic part of the vehicle.

Microphone input (KDC-X993 only)

Microphone (Accessory5)

Steering remote control (Light Blue/Yellow)

REMO.CONT

To use the steering wheel remote control feature, you need to an exclusive remote adapter (not supplied) matches your car is required.

R L

Rear output

RL Front output Sub Woofer output

FM/AM antenna input

Fuse (10A)

Wiring harness (Accessory1)

White

White/Black

Gray

Gray/Black

Green

Green/Black

Purple

Purple/Black

AUX input (Stereo)

Use the mini-plug which is stereo type and does not have any resistance.

To Kenwood disc changer/ External optional accessory

⁄To connect these leads, refer to the relevant instruction manuals.

To front left speaker

To front right speaker

To rear left speaker

To rear right speaker

If no connections are made, do not let the wire come out from the tab.

Power control wire (Blue/White)

P.CONT

Motor antenna control wire (Blue)

ANT.

CONT

TEL mute wire (Brown)

MUTE

Dimmer control wire (Orange / White)

ILLUMI

Car fuse box

Ignition wire (Red)

ACC

Battery wire (Yellow)

Ground wire (Black) · (To car chassis)

When using the optional power amplifier, connect to its power control terminal.

Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the film-type or short pole type antenna.

Connect to the terminal that is grounded when either the telephone rings or during conversation.

⁄To connect the Kenwood navigation system, consult your navigation manual.

To car light control switch

Ignition key switch

Car fuse box (Main fuse)

–

+

Battery

English 51

Contents

For your records US Residence Only www.Kenwoodusa.com Before use Basic Operation Function Control Display Settings Music disc/Audio file Operation 2WARNING To prevent injury or fire, take the following precautions: Do not use this unit before canceling Demonstration mode How to reset your unit Cleaning the Unit Release [SRC] Microphone Auxiliary [ ] [AUD] Favorite Control: Control knob Tuner functions FM band: Control knob AM band: Control knob Tuning: Control knob 1Enter Function Control mode Press the [FNC] button 2Select a Function group 3Select your desired setup item Operation type Select “MENU” > “DEMO Mode” Source function item Preference item Next page Page Page Display Type Selection Display Type Enter Display type selection mode Select “SETUP” 2Select the Display type Turn the Control knob 3Exit Display type selection mode Press the [FNC] button In Audio file/ iPod source In Standby/ Auxiliary input source In SIRIUS/ SAT source (Optional) 2Select the text display part 3Select the text Illumination Color Selection 1Enter Illumination color selection mode Select “SETUP” > “Color Select” 2Select the place where you want to set the Illumination Color Place 3Select the Illumination Color Music Search 2Search for music Audio file Internal CD source Cancelling the Music Search mode Searching for Music by Initial 2Start the alphabet search Push the Control knob towards down. “A B C …” is displayed 3Select the initial to be searched for 4Determine the selected initial Press the Control knob Direct Music Search 1Enter the music number Press the number buttons on the remote control 2Search the music Press the [4] or [¢] button 1Enter Auto Memory Entry mode Select “AUTO MEMORY” 2Open Auto Memory Entry Turn the Control knob to select “YES”, and then press the Control knob 2Enter Preset Memory mode Press the [] button 3Select the number to put in the memory Turn the Control knob PTY (Program Type) Program Type Preset Presetting the Program Type 2Enter Program Type Preset mode Press the [] button Recalling the preset Program Type Page 2Select Tuning item Tuning item 3Enter the frequency or Channel 4Do Direct Access Tuning HD Radio Tagging (iTunes Tagging) Receiving a call Answering a Phone Call Press the [AUD] button Rejecting an Incoming Call Press the [SRC] button or press the [] button for at least 1 second Making a call 1Enter dialing method mode 2Select a dialing method Press the Control knob 3Exit the dialing method mode Press the [] button Dial a number Calling a number in the Phone Book 2Select the Phone Book mode Press the Control knob Calling a number in the call log 1Enter dialing method mode Press the [] button 2Select the call log mode Press the Control knob Make a voice dialing call 3“PN Type” is displayed Press the Control knob for at least 1 second Registering to the Preset Dial Number List Enter the phone number you wish to register Selecting Bluetooth Audio source Pause and play Music Search Activating Security Code 2Enter Security Code mode 3Enter Security Code 4Confirm the Security Code 5Do the step 3 through 4 operation, and reenter the Security Code Manual Clock Adjustment 2Enter Clock adjustment mode Press the Control knob for at least 1 second. The clock display blinks 3 Adjusting Clock 4Exit Clock adjustment mode Press the [FNC] button Demonstration mode setting 2Set the Demonstration mode 3Exit Demonstration mode Press the [FNC] button Theft Deterrent Faceplate Removing the Faceplate Audio Control Range 1Enter Audio Control mode Press the [AUD] knob 2Select the Audio item to adjust Press the [AUD] knob 3Adjust the Audio item Turn the [AUD] knob Cabin selection Car type 1Enter Cabin select mode Select “SOUND” > “Setup” > “Cabin” 2Select the car type DTA (Digital Time Alignment) setting 1Enter DTA setting mode Select “SOUND” > “Setup” > “DTA” 3Set the compensation value of the speaker position X’Over setting Preset Equalizer curve select Equalizer curve 2Select the Equalizer curve Select the iPod Equalizer curve 2.Select the iPod Equalizer curve Preset position selection Manual position setting Audio Preset Memory 1Setup Sound Control 4Turn the Control knob to select “YES”, and then press the Control knob 5Exit Audio preset memory mode Press the [FNC] button Audio Preset Recall Favorite Preset Memory 1Display a favorite item Source Registerable items iPod setting Favorite Name Setting 2Retrieve the Preset Memory to change Turn the Control knob 3Enter Favorite Name set mode 4 Enter the name Character type Registering Bluetooth device When registering from Bluetooth devices 1Turn on the control unit 2Start registering a unit by operating the Bluetooth device 3Enter a PIN code 3Input the PIN code 4Register a PIN code 5Exit PIN code edit mode Press the [FNC] button Downloading the Phone Book To download automatically Deleting a Registered Bluetooth device 1Select Bluetooth device deletion mode Select “MENU” > “Device Delete” 4Delete the selected Bluetooth device Press the Control knob 5Turn the Control knob to select “YES”, and then press the Control knob 6Exit Bluetooth device deletion mode Press the [FNC] button Select “PB Name Delete” (Delete) 6Turn the Control knob to select “YES”, and then press the Control knob Exit Phonebook name edit mode Setting a Voice Command for Category Select Phone Number type edit mode Select “BT” SMS (Short Message Service) When a new message arrives Displaying the SMS 1Select SMS Inbox mode Select “BT” > “SMS” > “SMS Inbox” Selecting Satellite Radio source Switching Seek Mode Preset Memory Cancelling the Preset Memory mode Press the [] button twice Press the Channel Scan 2Release it when the channel you want to listen to is received 2Enter the channel Press the number buttons 3Do Channel Search In Tuner/HD Radio source ¤CAUTION About Audio file iPod/iPhone that can be connected to this unit About USB device About Satellite Radio tuner (Optional) About HD Radio (Optional) For operating KCA-BT200(Optional) For operating KCA-BT100(Optional) About the Cell-Phone About the Bluetooth Audio player About KENWOOD “Music Editor” of PC application Menu Glossary •BT DVC Status (Displaying the Bluetooth device Status) •HIGHWAY-SOUND •Mic Gain •NR Level •SP Select (Setting up the Voice Output Speakers) About CD players/disc changers connected to this unit For Good Reception Page CAUTION Installation the Microphone Unit General Tuner source Disc source Audio file source Hands-free Bluetooth audio source The messages shown below display your systems condition Page FM tuner section Digital FM tuner section (KDC-HD942U) AM tuner section Digital AM tuner section (KDC-HD942U) Bluetooth section (KDC-X993) USB Interface Audio section Auxiliary input 2CAUTION IC (Industry Canada) Notice FCC WARNING FCC NOTE