Function of KDC-X792

Picture downloading

Downloading movies, wallpapers and G-Graphic. You can use downloaded pictures for the display of this unit.

1Connected the USB device

Connect the USB device containing the files to be downloaded into this unit.

Insert a CD-R/CD-RW

Insert a CD-R/CD-RW containing files to be downloaded into this unit.

⁄

•Our URL http://www.kenwood.net-disp.com describes how to make CD-R/CD-RW/USB device.

2Select the picture downloading item during Menu mode (In Standby mode)

Select the “DISP Data DL” display.

For how to select Function Control items, refer to <Function Control> (page 6).

3Enter downloading mode

Press the Control knob for at least 1 second.

4Select a mediaPush the Control knob towards right or left. Press the Control knob.

Select a USB device (“USB”) or CD-R/RW (“CD”).

5Enter the downloading mode

Turn the Control knob to select “YES”, and then press the Control knob.

“File Check!!” display blinks.

6Select files to be downloaded

Turn the Control knob or push it towards up or down.

Press the Control knob.

7Start downloading

Turn the Control knob to select “YES”, and then press the Control knob.

When the downloading finishes, “Finished” is displayed.

⁄

• Picture downloading may take as long as 20 minutes.

Cancelling Downloading

Press the [FNC] button.

8Exit the downloading mode Press the [FNC] button.

⁄

•Do not operate this unit while downloading to prevent data from being damaged.

•The number of files that can be downloaded.

-Downloaded movie: 1 file

-Wallpaper: 1 file

-G-Graphic: 1 file

•When a new wallpaper is downloaded, it is overwritten to the currently downloaded wallpaper.

There is no way to delete the downloaded pictures.

•The downloaded pictures can be used for display. “DISP” > “GRAPH” of <Function Control> (page 6) “DISP” > “GMENU” of <G-Analyzer Control> (page 12)

•When you cannot download the pictures to this unit, there may be a problem with the CD-R/CD-RW/USB device write method.

Refer to the URL http://www.kenwood.net-disp.com.

PICTURE ENGINE

Picture Engine is an application software distributed from Kenwood's official website. Utilizing this software, you can create an original still image file. As for the download of application, please browse “http://www.kenwood.net-disp. com/” for directions.

Demonstration mode setting

Turning the demonstration mode ON/OFF.

1Select Demonstration item during Menu mode Select the “DEMO Mode” display.

For how to select Function Control items, refer to <Function Control> (page 6).

2Set the Demonstration mode

Press the Control knob for at least 2 seconds. Pressing this button for 2 seconds or longer toggles the setting between “ON” and “OFF”.

3Exit Demonstration mode Press the [FNC] button.

English 21