Kenwood KDC-X792, KDC-MP638U, KDC-MP738U, KDC-X692 About Display Type, Function Control, Display, Operation, Operation type, 3Make a setting, 4Exit Function Control mode, 2Select your desired setup item

Function Control

1Enter Function Control mode Press the [FNC] button. Function icon is displayed.

2Select your desired setup item

Operation type	Operation
Movement between items	Turn the Control knob.
Selection of item	Press the Control knob.
Return to previous item	Press the [FNC] button or “	” icon

Repeat selection and determination until your desired setup item is selected.

Example:	MENU	DISP
MENU	DISP
	TYPE	TEXT

3Make a setting

Turn the Control knob to select a setting value, and then press the Control knob.

Some items require you to keep pressing the Control knob for 1 or 2 seconds so that you can make a setting. For these items, the time during which you need to keep pressing the Control knob is displayed in the Entry column in seconds. For the functions accompanied by the description of the setting procedure and so forth, the reference page numbers are displayed.

4Exit Function Control mode

Press the [FNC] button for at least 1 second.

Display Settings

About Display Type

Shown below are examples of display types.

Display		Display Type
“TYPE [A]”
				2
	4
			1
“TYPE [B]”
						2
					1
					1
					1
“TYPE [C]”
						2
							3	1
								1
								1
“TYPE [D]”
							2
							1
							6
“TYPE [E]”
	5
“TYPE [F]”
	7

⁄

•1 Text display part

2 Status display

3 Icon display part

4 Graphic display part

5 Clock display

6 Display (varied depending on the source)

7 G-Analyzer display part

8 KDC-X792/KDC-X692/KDC-MP738U/KDC-MP638U