Preset Memory

Putting the channel in the memory.

1Select the channel to put in the memory Push the Control knob towards right or left.

2Enter Preset Memory mode Select “P.MEM”.

For how to select Function Control item, refer to <Function Control> (page 6).

3Select the number to put in the memory Turn the Control knob.

4Determine the number to put in the memory Press the Control knob.

5Allow the determined number to take effect Press the Control knob.

Cancelling the Preset Memory mode

Press the [FNC] button.

⁄

•Only the channel number is stored. Category information is not stored.

•This function can be operated with [1] — [6] button.

- Press the desired [1] — [6] button for at least 2 seconds.

Preset Tuning

Recalling the channels in the memory.

1Enter Preset Tuning Select mode Turn the Control knob.

A list is displayed.

2Select a desired station in the memory Turn the Control knob.

3Recall the station Press the Control knob.

Cancelling Preset Tuning

Press the [FNC] button.

⁄

•This function can be operated with [1] — [6] button. - Press the desired [1] — [6] button.

English 27