Function of KDC-X792

G-Analyzer Operation

G-Analyzer Horsepower Analysis

This measures the horsepower and displays graph and max power. It automatically saves the highest record.

¤

•Do not use G-Analyzer Horsepower Analysis on the Public roads.

•Do not use this product in any way that prevents you from driving safely.

•Follow all driving laws and use common sense when using this product.

1Enter G-Analyzer Horsepower Analysis

mode (In Display Type F) Select “DISP” > “GMA” > “HP”.

For how to select Function Control item, refer to <Function Control> (page 6).

“HORSEPOWER” is displayed.

Previous max power and record are displayed.

2Begin measurement Press the Control knob. “Ready” is displayed.

3Start the car. “Measure” is displayed.

After 15 seconds of measurement, the result is displayed.

¤

•Pressing the Control knob also begins the measurement. To prevent danger, push the control knob before starting the car.

4To display the maximum power in the section Push the Control knob towards right or left. Each time you push the Control knob, the maximum power in the section is displayed.

5Exit G-Analyzer Horsepower Analysis mode Press the [FNC] button.

⁄

•Like your vehicle’s speedometer, G-Analyzer is no more than a measuring function. The HP or G value measured by this unit may not be completely accurate due to its simplified method of measurement. The G-Analyzer is only for reference and should not be used to confirm the horsepower specifications of your vehicle.

•Measuring after starting the car lowers the accuracy.

•The record will not be renewed if the measurement is discontinued.

G-Analyzer Reset

Resets the value of G-Meter, G-Counter and G- Analyzer Horsepower Analysis.

1Enter G-Analyzer Reset mode (In Display Type

F)

Select “DISP” > “GMA” > “RESET”.

For how to select Function Control item, refer to <Function Control> (page 6).

“G-RESET” is displayed.

2Select the Reset item Turn the Control knob.

Display

 

Setting

“Meter Reset”

 

Reset the value of G-Meter.

“Power Reset”

 

Reset the value of G-Analyzer Horsepower

 

 

Analysis.

“Counter Reset”

 

Reset the value of G-Counter.

3Determine the item you want to reset Press the Control knob.4Reset the valueTurn the Control knob to select “YES”, and then press the Control knob.

“Reset OK” is displayed.

5Exit G-Analyzer Reset mode Press the [FNC] button.

14 KDC-X792/KDC-X692/KDC-MP738U/KDC-MP638U