[SRC] [VOL]
[
][BAND] [] / [E] [1] — [6]
Basic Operation
Selecting Tuner source
Press the [SRC] button.
Select the “TUNER” display.Selecting the Receiving Band
Press the [BAND] button.
Each time you press the button, the receiving band alternates between the FM1, FM2, FM3, MW, SW1, and SW2
Selecting the Receiving station
Press the [4] or [¢] button.
During reception of stereo stations the “ST” indicator lights up.Selecting the preset channel
Press the [1] – [6] button.
Station Preset Memory
Putting a station in the memory.1Select the frequency to put in the memory Press the [4] or [¢] button.
2Select the number to put in the memory Press the [1] – [6] button for at least 2 seconds.
⁄
•Up to 6 stations with a different band (FM/MW/SW) can be memorized to the [1] – [6] button according to the setting of “PRESET TYPE” of <Initial Setting> (page 18).
Tuner Setting
You can select following Tuner Setting items.1Select the TUNER source Press the [SRC] button. Select the “TUNER” display.2Enter Function Setting mode
Press the [VOL] knob for at least 1 second. “FUNCTION” is displayed.
3Select the function item
Turn the [VOL] knob and press it when the desired item is displayed.
Select “SETTINGS” > Function item.
Function item | Selectable setting/item |
“LOCAL SEEK” | Only stations whose reception is good are searched |
| in auto seek tuning. (AM band only) |
| OFF/ON |
| “SEEK MODE” | Selects the tuning mode of the radio. |
| AUTO1: Automatic search for a station. |
| AUTO2: Search in order of the stations in the Preset |
| memory. |
| MANUAL: Normal manual tuning control. |
“AUTO MEMORY”* Putting stations with good reception in the memory automatically.
NO/YES
| “MONO SET” | You can reduce the noise when stereo broadcasts |
| are received as monaural. (FM band only) |
| OFF/ON |
(Factory setting: Underlined)
4Make a setting
Turn the [VOL] knob and press it when the desired item is displayed.
When select “AUTO MEMORY”:
Turn the [VOL] knob to select “YES”, and then press the [VOL] knob.
When 6 stations that can be received are put in the memory, auto memory entry closes.
5Exit Function Setting mode
Press the [
] button for at least 1 second.
⁄
•* This setting can be made when “TYPE NORMAL” is selected for the “PRESET TYPE” of <Initial Setting> (page 18).