Kenwood KDC-U546BT Registering PIN Code, Displaying the Firmware Version, Downloading the Phone Book, To download automatically, To download from the cell-phonemanually

Bluetooth Setup

Registering PIN Code

By operating the Bluetooth device, specify the PIN code necessary for registering this unit.

1Select PIN code edit mode

For how to select setup item, refer to <Bluetooth Setup> (page 20).

Select “SETTINGS” > “DETAILED SET” > “PIN CODE EDIT”.

2Enter PIN code edit mode Press the [VOL] knob.The current setting of PIN code is displayed.

3Input the PIN code

Operation type	Operation
Select the numbers.	Turn the [VOL] knob.
Move to the next digit.	Press the [¢] button.
Delete the last digit.	Press the [4] button.

4Register a PIN code Press the [VOL] knob.

If “COMPLETE” is displayed, registration is completed.

5Exit Function Setting mode

Press the [] button for at least 1 second.

⁄

•By default, “0000” is specified.•A PIN code can be specified with up to 8 digits.

Displaying the Firmware Version

Display the version of the firmware of this unit.

1Enter Bluetooth Firmware update mode

For how to select setup item, refer to <Bluetooth Setup> (page 20).

Select “SETTINGS” > “DETAILED SET” > “BT F/W UPDATE”.

2Enter Bluetooth Firmware update mode Press the [VOL] knob.

The firmware version appears.

3Exit Function Setting mode

Press the [] button for at least 1 second.

⁄

•For how to update the firmware, access our web site. http://www.kenwood.com/cs/ce/bt/

Downloading the Phone Book

Download the phone book data from the cell- phone to this unit so that you can use the Phone Book of this unit.

To download automatically

If the cell-phone supports a phone book synchronization function, the phone book is downloaded automatically after Bluetooth connection.

⁄

•Setting on the cell-phone may be required.

•If no phone book data is found in the unit even after the compete display, your cell-phone may not support automatic download of phone book data. In this case, try downloading manually.

To download from the cell-phone manually

1By operating the cell-phone, end the hands-free connection.

2By operating the cell-phone, send the phone book data to this unit

By operating the cell-phone, download the phone book data to this unit.•During downloading: “DOWNLOADING” is displayed.•After completion of downloading: “COMPLETE” is displayed.

3By operating the cell-phone, start the hands- free connection.

⁄

•Up to 1000 person phone numbers can be registered for each registered cell-phone.

•Up to 25 digits can be registered for each phone number along with up to 50* characters representing a name.

(* 50: Number of alphabetic alphabetical characters. Fewer characters can be input depending on the type of characters.)

•To cancel downloading of the phone book data, operate the cell-phone.

22 KDC-U546BT