Function of remote control

Direct Access Tuning

Tuning in a desired radio station by entering the frequency.1Enter Direct Access Tuning mode Press the [DIRECT] button.“– – – –” is displayed.
2Enter the frequency Press the number buttons. Example:
Desired frequency
Press button
92.1 MHz (FM)[9], [2], [1]
810 kHz (AM)[8], [1], [0]
3Tune in to entered the frequency Press the [4] or [¢] button.
Cancelling Direct Access Tuning

Press the [] button.

⁄

•You can enter the FM band frequency in steps of a minimum of 0.1 MHz.

Frequency Step Setting

Changing the tuning frequency step.The original setting is FM band 50 kHz and MW band 9 kHz.
1Turn the power OFF
Press the [SRC] button for at least 1 second.
2Switch the frequency step
While pressing the [1] and [5] buttons, press the [SRC] button.
Release your fingers from the button after the display appears.The frequency step changes to FM band 200 kHz, and MW band 10 kHz.

⁄

•When the same operation is repeated, the frequency step returns to the original setting.

•When the frequency step is changed, the frequencies in the memory are deleted.

English 11