Operation of Hands-Free Phoning

[SRC] [VOL]

⁄

[ ][ ][BAND][] / [E][VOICE]

[1] — [6]

Connecting a Bluetooth Device

Before use the Bluetooth device, you need to connect Bluetooth device to this unit. The following 3 steps procedure is necessary.

Step 1. Pairing (Registering from Bluetooth devices)

To make your Bluetooth device (cell-phone) usable with this unit, you need to register it (pairing).

1Turn on this unit. Press the [SRC] button.
2Start registering this unit by operating the Bluetooth device

By operating the Bluetooth device, register the hands-free unit (pairing). Select “KENWOOD BT CD/R-3P1” from the list of connected units.

3Enter a PIN code
Input the PIN code (“0000”) in the Bluetooth device.

Check that registration is complete on the Bluetooth device. PIN code is set to “0000” as the default. You can change this code. Refer to <Registering PIN Code> (page 22).

4By operating the Bluetooth device, start hands- free connection.
Step 2. Connection

If you have registered 2 or more cell-phones, you need to select one of them. For more details, see <Selecting the Bluetooth Device You Wish to Connect> (page 23).

When a cell-phone is connected, the “BT” indicator is lights up.
Step 3. Hands-free phoning
You can do hand-free phoning when the connection is made.

•When registering from this unit. Refer to <Registering Bluetooth Device> (page 21).

•For details on the Bluetooth cell-phone with the hands- free function, see <About the Cell-Phone> (page 29).

Making a Call

You can select following dialing method.1Enter Bluetooth mode Press the [VOL] knob. “BT MODE” is displayed.
2Enter dialing method mode

Press the [] button. “PHONE BOOK is displayed.

3Select a dialing method

Turn the [VOL] knob and press it when the desired item is displayed.

Display

Overview

“PHONE BOOK”

Selecting the initial to be searched or name for the

 

phone book.
“OUT-CALL”

Calling a number in the outgoing call list.

“IN-CALL”

Calling a number in the incoming call list.

“MISSED CALLS”

Calling a number in the missed calls list.

“NUMBER DIAL”

Making a call by entering phone number.

Operation method of each mode is described below.
4Exit the dialing method mode

Press the [] button for at least 1 second.

Disconnecting a Call

Press the [SRC] button.

Calling a Number in the Phone Book

1Select the Phone Book mode
For how to select dialing method, refer to <Making a Call> (page 12).Select the “PHONE BOOK” display.
2Select the initial to be searched for

Operation type

Operation

Move to the next character.

Turn the [VOL] knob.

Move to the next row.

Press the [BAND] button.

Determine the selected initial.

Press the [VOL] knob.

12 KDC-U546BT