Other Functions

Release button [SRC] [VOL]

[]

Clock Adjustment

1Select the source Press the [SRC] button.

2Enter Function Setting mode

Press the [VOL] knob for at least 1 second. “FUNCTION” is displayed.

3Enter Clock adjustment mode

Turn the [VOL] knob and press it when the desired item is displayed.

Select “SETTINGS” > “CLOCK” > “CLOCK ADJUST”.The hour display blinks4Adjusting Clock

Turn the [VOL] knob to set the hours and press it when to finish the hour adjusting.

The minute display blinks.

Turn the [VOL] knob to set the minutes and press it when to finish the minute adjusting.

5Exit Function Setting mode

Press the [] button for at least 1 second.

Demonstration Mode Setting

Turning the demonstration mode ON/OFF.

1Enter Function Setting mode

Press the [VOL] knob for at least 1 second. “FUNCTION” is displayed.

2Select Demonstration mode

Turn the [VOL] knob and press it when the desired item is displayed.

Select “DEMO MODE”.
3Set the Demonstration mode

Turn the [VOL] knob and press it when the desired item is displayed.

Select “ON” or “OFF”.

4Exit Function Setting mode

Press the [] button for at least 1 second.

Initial Setting

You can select following Initial Setting items.

1Select the Standby source Press the [SRC] button. Select the “STANDBY” display.

2Enter Function Setting mode

Press the [VOL] knob for at least 1 second. “FUNCTION” is displayed.

3Select the function item

Turn the [VOL] knob and press it when the desired item is displayed.

Select “INITIAL SET” > Function item.

Function item

Selectable setting/item

“PRESET TYPE”

TYPE NORMAL:

 

1 station can be assigned to 1 preset button in each

 

of 6 bands (FM1, FM2, FM3, MW, SW1 and SW2),

 

i.e., a total of 36 stations (6 stations x 6 bands) can

 

be preset.

 

TYPE MIX:

 

A total of 6 stations can be assigned to a total of 6

 

preset buttons regardless of band (FM1, FM2, FM3

 

MW, SW1, and SW2). You can recall a preset station

 

without switching between bands.
“KEY BEEP”

Setting the operation check sound (beep sound)

 

on/off.

 

OFF/ON

“TDF ALARM”

Informs you by alarm sound about 30 seconds

 

that you forgot to detach the faceplate when ACC

 

is set to OFF.

 

OFF/ON

“BUILT-IN AUX”

When this is set to ON, AUX source can be selected.

 

ON1: Outputs the sound of external unit connected

 

to the AUX terminal when switched to AUX

 

source.

 

ON2: Activates the attenuator function when

 

turning on the power with AUX source

 

selected. Cancel the attenuator function

 

by turning the volume knob clockwise

 

when listening to the audio of the external

 

equipment.

 

OFF: Disables the selection of AUX source. Set to

 

OFF when not using the AUX terminal.

18 KDC-U546BT