Notes

•If you experience problems during installation, consult your Kenwood dealer.

•When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area.

•If the unit fails to operate properly, press the Reset button to restore factory settings.

•Press the reset button if the disc auto changer fails to operate correctly. Normal operation should be restored.

Reset button

•We recommend the use of <Security Code> (page 44) to prevent theft.

•The characters conforming to ISO 8859-1 character set can be displayed.

•The RDS feature won’t work where the service is not supported by any broadcasting station.

•There are places in this manual where lit indicators are described; however, the only time an indicator will light is in the following settings: When indicator is selected as mentioned in <Text Display Switching> (page 22)

•The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may be inapplicable.

Cleaning the Unit

If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth.

If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe it again with a clean soft dry cloth.

•Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters.

Cleaning the Faceplate Terminals

If the terminals on the unit or faceplate get dirty, wipe them with a clean soft dry cloth.

Before using this unit for the first time

This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the <Demonstration mode Setting> (page 53).

About ODD (Offset Dual Differential) D/A System

The high quality sound play is to be done by ODD D/A System. Dual D/A converters are built-in the ODD D/A System, and the digital processing is isolated and controlled separately for front channel so the channel separation is improved sharply. Also, the ODD D/A System produces the data by which the sound data is offset on the minus side and converts the two signals (original and offset data) to the analog signal, which has less noise and distortion, by the synthetic process.

However, ODD D/A System will be disabled if the following settings are selected.

-When "2ZONE" of <Audio Setup> (page 11) is "ON".

-When <Bypass Control> (page 16) is "Bypass".

English 5