Kenwood KRF-V4550D Digital connections

Digital connections

The digital in jacks can accept Dolby Digital, or PCM signals. Connect components capable of outputting Dolby Digital, or standard PCM (CD) format digital signals.

If you have connected any digital components to the receiver, be sure to read the "Input mode settings" section

carefully.	7
	OPTICAL DIGITAL OUT
	(AUDIO)
	CD player

Optical fiber cable

Setting up the system

11

Preparations

COAXIAL DIGITAL OUT (AUDIO)

COAXIAL DIGITAL OUT (AUDIO)

RF digital demodulator (DEM-9991D) (sold separately)

DOLBY DIGITAL RF OUT (AUDIO)

PCM OUT

Component with a Dolby Digital, or

PCM COAXIAL DIGITAL OUT

Connect the video signal and analog audio signals to the VIDEO2/MONI- TOR jacks.

(See "Connecting video compo- nents".)

LD player

To connect an LD player with a DIGITAL RF OUT, connect the LD player to the KENWOOD RF digital demodulator (DEM-9991D). Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver.

Connect the video signal and analog audio signals to the VIDEO2/MONITOR jacks. (See "Connecting video components".)