Normal playback
Muting the sound
The MUTE key lets you mute the sound of the speakers.
Press the MUTE key.
SP |
| TI.VOL | L | C | R | |
|
| MUTE | LFE |
| SW | |
RDS | EON | PTY |
| |||
LS | S | RS | ||||
TP | TA | NEWS | ||||
|
|
|
Blinks
To cancel
Press the MUTE key again so that the "MUTE" indicator goes off.
• Muting can also be canceled by adjusting the volume.
SOURCE DIRECT playback (analog sources only)
Use this function to pass the source material direct to the amplifier, bypassing any audio processing.
Press the SOURCE DIRECT key.
FM AUTO SOUND DIGITAL
AM PRO LOGIC S.DIRECT
MHz 3 STEREO MONITOR
kHz DOWN MIX DSP
•When you press the LISTEN MODE, SOUND, or SET UP keys, or switch to another input source, SOURCE DIRECT playback will be canceled.
To cancel
Press the SOURCE DIRECT key again.
•If SOURCE DIRECT playback was activated when using a surround mode, cancelling it reactivates the previous surround mode.
Listening with headphones
1Press the SPEAKER key so that the speaker indicator goes off.
Make sure the SP indicators are turned off.
SP
A
•If you turn off all of the speakers when in the surround mode, the mode is canceled as well, resulting in stereo playback.
•The speakers do not switch off during the 6ch INPUT mode.
Select the other input mode. | 7 |
2Connect headphones to the PHONES jack.
3Use the VOLUME CONTROL (VOLUME) to adjust the volume.
Recording
Recording audio (analog sources)
19
MONITOR
INPUT SELECTOR
Recording a music source
When recording a music source, switch the VIDEO2/MONITOR
setting to "MONITOR" . | 7 |
1Use the INPUT SELECTOR knob to select the source (other than "MD/TAPE") you want to record.
2Set the cassette deck to record.
3Start playback, then start recording.
Recording tapes or MD (with MONITOR function)
When recording a music source, switch the VIDEO2/MONITOR | Operations | |||||||
setting to "MONITOR". | 7 | |||||||
| ||||||||
|
|
|
|
|
|
|
| |
MONITOR = MD/TAPE recording |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
1 Press the MONITOR key. |
|
|
|
|
|
| ||
FM | AUTO SOUND | DIGITAL |
|
|
| |||
|
|
|
|
| ||||
|
| AM PRO LOGIC S.DIRECT |
|
|
| |||
|
| MHz 3 STEREO MONITOR |
|
|
| |||
|
| kHz DOWN MIX | DSP |
|
|
| ||
|
|
|
|
|
|
|
| |
2Use the INPUT SELECTOR knob to select a source other than "MD/TAPE."
3Start playback on the cassette deck connected to the MONITOR jacks and start recording on the cassette deck connected to the MD/TAPE jacks.
MD/TAPE = MONITOR recording
1Use the INPUT SELECTOR knob to select "MD/TAPE."
2Start playback on the cassette deck connected to the MD/TAPE jacks and start recording on the cassette deck connected to the VIDEO2/MONITOR jacks.
•To copy tapes using a double cassette deck, refer to the instruction manual of the double cassette deck.
MONITOR function (analog sources only)
You can connect a cassette deck or graphic equalizer to the VIDEO2/ MONITOR jacks of the receiver. If a graphic equalizer is connected, the MONITOR key should be left in the on position. Alternately, if a cassette deck equipped with a