Kenwood KRF-V4550D Names and functions of parts

Names and functions of parts

Frequency display,

PRO LOGIC

Input display,

indicator

Preset channel display,

DIGITAL indicator

AUTO SOUND indicator

Surround mode display

Speakers' indicator

Band indicators

S.DIRECT indicator

AUTO indicator

MUTE indicator

MEMO. indicator

ST. indicator

TUNED indicator

RDS indicators

DOWN MIX indicator

MONITOR indicator

3 STEREO indicator

Speaker selection indicators

Input channel indicators

STEREO indicator

Output channel indicators

Display

5

Preparations

1 POWER key		^	7 DIMMER key	)•
Use to switch the main power ON/OFF.			Use to adjust the brightness of the display.
2 ON/STANDBY (	) key	^	Use to select the REC MODE.
Use to switch the power ON/STANDBY when			8 MONITOR key	(
the POWER is turned ON.			Use to monitor the source that is connected
STANDBY indicator			to the VIDEO2/MONITOR jack.
3 MULTI CONTROL key		^	9 VOLUME CONTROL knob	*
Use to control a variety of settings.			0 PHONES jack	(
4 SET UP key		^	Use for headphone listening.
Use to select speakers' settings etc.			! SPEAKER key	&
5 Surround indicators			Use to turn the speaker ON/OFF.
DOLBY DIGITAL indicator		§	MUTE key	(

^ MEMORY key	™
Use to store radio stations in the preset
memory.
& SOURCE DIRECT key	(
Use to pass the source material direct to the
amplifier.
* INPUT SELECTOR knob	*

Use to select the input sources.

Lights when the receiver is in the Dolby

Digital mode.
PRO LOGIC indicator	§
Lights when the receiver is in the PRO LOGIC
mode.
3 STEREO indicator	§
Lights when the receiver is in the 3 STEREO
mode.
6 INPUT MODE key	7

Use to switch between the digital and analog inputs.

Use to temporarily mute the sound.
@ SOUND key	¶

Use to adjust the sound quality and ambience effects.

# BAND key	¡
Use to select the broadcast band.
$ AUTO key	¡
Use to select the auto tuning mode.
% LISTEN MODE key	§
Use to select the listening mode.

Standby mode

While standby indicator is lit, this receiver is in standby mode and consumes a small amount of current for back-up. This system can be switched ON by using the remote control.