Presetting radio stations manually
The RDS auto memory function assigns preset numbers to RDS stations starting from preset number "1". Therefore, be sure to execute the RDS auto memory function before using the following operations to manually store AM stations and other FM stations, and RDS stations.
"Presetting RDS stations (RDS AUTO MEMORY)". | ™ |
MULTI CONTROL
MEMORY
Listening to radio broadcasts
23
2Enter the number of the preset you want to receive (up to "40").
Press the numeric keys in the following order:
For "15", press .......... | 0,5 |
For "20", press .......... | 0,0,) |
•If you make a mistake entering a two digit number, press the +10 key several times to return to the original display and start again.
|
|
|
|
|
|
|
| DIGITAL |
|
|
|
| SP |
| TI.VOL | L | C | R | FM |
| AUTO |
| |
|
|
|
|
| |||||||
|
|
| MUTE | LFE |
| SW | AM PRO LOGIC S.DIRECT |
| MEMO |
| |
|
|
|
|
|
|
|
|
| |||
| RDS | EON | PTY |
| MHz 3 STEREO | MONITOR |
| ST. |
| ||
|
|
|
|
|
|
|
|
| |||
| LS | S | RS | kHz DOWN MIX | DSP | TUNED |
| ||||
| TP | TA | NEWS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1Tune to the station you want to store.
2Press the MEMORY key while receiving the station.
|
| Blinks for 5 seconds | Lights for 5 seconds | ||||||
SP |
| TI.VOL | L | C | R | FM | DIGITAL | AUTO | |
|
| MUTE | AM PRO LOGIC S.DIRECT | MEMO | |||||
|
| LFE |
| SW | |||||
|
|
| MHz 3 STEREO | MONITOR | ST. | ||||
RDS | EON | PTY |
| ||||||
LS | S | RS | kHz DOWN MIX | DSP | TUNED | ||||
TP | TA | NEWS | |||||||
|
|
|
|
|
| ||||
Proceed to step 3 within 5 seconds.
(If more than 5 seconds elapse, press the MEMORY key again).
3Use the MULTI CONTROL to select one of the station presets (1 – 40).
4Press the MEMORY key to accept the setting.
•Repeat steps 1, 2, 3, and 4 to store as many stations as necessary.
•If you store a station at a previously used preset, the old station will be replaced by the new one.
Receiving preset stations
Numeric keys 
TUNER 
Receiving preset stations in order (P.CALL)
P.CALL 4 / ¢ |
|
TUNER | Operations |
|
1Press TUNER to select the tuner as the source.
2Use the P.CALL keys to select the desired station.
•Each time you press the key, another preset station is received in order.
Pressing the P.CALL (¢) key does the following: 01=02=03= ...... 38=39=40=01=02=03=
Pressing the P.CALL (4) key does the following: 01+02+03+ ...... 38+39+40+01+02+03+
Holding down the key, lets you skip through the presets, receiving each for 0.5 seconds a piece.
1Press TUNER to select the tuner as the source.