PREPARATION

Installing/ Removing the (Optional) Battery Pack

1Match the guides of the battery pack with the grooves on the upper rear of the transceiver, then firmly press the battery pack in place.

2

Lock the safety catch to

1

 

prevent accidentally releasing

2

 

the battery pack.

 

3

To remove the battery pack,

 

 

lift the safety catch, press the

 

 

release latch, then pull the

 

 

battery pack away from the

3

 

transceiver.

 

 

Note:

◆For battery pack charging procedures and useage, refer to the battery charger Instruction Manual.

◆Before charging a battery pack that is attached to the transceiver, ensure that the safety catch is firmly closed.

◆While operating the transceiver using a Li-ion battery pack in areas with an ambient temperature of –10°C/ +14°F and lower, operating time may be shortened.

Installing the (Optional) Antenna

Screw the antenna into the connector on the top of the transceiver by holding the antenna at its base and turning it clockwise until secure.

Optional antenna