Scan Revert
The Scan Revert channel is the channel selected when you press the PTT switch to transmit during scan. Your dealer can program one of the following types of Scan Revert channels:
•Selected: The last channel selected before scan.
•Selected + Talkback: Same as “Selected”, plus you can respond to calls on the channel at which scan is paused.
•Priority 1/ Priority 2: The Priority channel (either Priority 1 or Priority 2) .
•Priority 1 + Talkback/ Priority2 + Talkback: Same as “Priority 1/ Priority 2”, plus you can respond to calls on the channel at which scan is paused.
•Last Called + Selected: The last channel on which you receive a call.
Scan Delete/Add
You can add and remove zones and/or channels/group IDs to and from your scan list.
1Select your desired zone and/or channel/group ID.
2Press the key programmed as Zone Delete/Add (to add/remove zones) or Scan Delete/Add (to add/remove channels/group IDs).
•You can also press and hold the key programmed as Scan Delete/Add to add/remove zones.
If the Priority channel has been set as Operator Selectable by your dealer, you can reprogram the Priority channels.
1Select your desired zone and channel/group ID.
2Press the key programmed as
3Press 
/
to select “NORMAL”, “PRIORITY 1” ( 
), “PRIORITY 2” ( 
), or “PRIORITY 1&2” ( 
).
4Press 
to save the setting and exit.
16