Installing the Belt Clip
Attach the belt clip using the supplied 3 x 8 mm screws.
Note: If the belt clip is not installed, its mounting location may get hot during continuous transmission or when left sitting in a hot environment.
Belt clip
3 x 8 mm screws
Do not use glue which is designed to prevent screw loosening when installing the belt clip. Acrylic ester, which is contained in these glues, may crack the transceiver’s back panel.
Installing the Cap over the Universal Connector
Insert the cap into place over the universal connector and secure it in place using the attached screw.
MIC
Universal
connector cap
Installing the (Optional) Speaker/ Microphone or Headset
1Insert the guide of the speaker/ microphone or headset connector into place over the universal connector.
2Secure the connector in place using the attached screw.
Note: When not using an optional speaker/ microphone or headset, install the cap over the universal connector.
MIC
Optional
speaker/ microphone