If a key has been programmed with Individual or Individual + Status, you can make calls to specific persons.
1Press the key programmed as Individual or Individual + Status.
2Press 
/
to select a unit ID from the list.
•You can enter the unit ID directly, using the DMF keypad.
3Press and hold the PTT switch to make the call.
•Speak into the transceiver as you would during a normal transmission.
Receiving
Select the desired zone and channel. If signaling has been programmed on the selected channel, you will hear a call only if the received signal matches your transceiver settings.
Note: Signaling allows your transceiver to code your calls. This will prevent you from listening to unwanted calls. Refer to “Signaling” on page 23 for details.
■Receiving Group Calls (Digital)When you receive a group call on a Conventional channel and the received group ID matches the ID set up on your transceiver, you can hear the caller’s voice.
When you receive a group call on a Trunking channel, the transceiver automatically switches to the communications channel to receive the call.
■Receiving Individual Calls (Digital)When you receive an individual call, a ringing tone will sound and the caller’s ID will appear on the display. To respond to the call, press and hold the PTT switch and speak into the transceiver as you would during a normal transmission.
11