VGS-1 OPTIONAL VOICE GUIDE & STORAGE UNIT

Voice Recorder

The voice recorder allows you to record conversations and create voice memos.

nAuto Recording

If activated, the auto recorder will continuously record all transmitted and received signals. The recording storage area retains only the last 30 seconds of recording.

nVoice Memos

To record a voice memo for later playback:

1Press the key programmed as Voice Memo, press and hold the key programmed as Playback, or access the Menu {page 12}.

•The duration of recording memory will appear on the display and begin counting down.

2Speak into the microphone to record your memo.

3Press to end the recording and store it in memory.

•If the memory becomes full, recording will stop and the voice memo will be stored in memory.

nAuto Reply Message

You can set the transceiver to automatically respond to Individual Calls while using FleetSync/NXDN.

1Press the key programmed as Auto Reply Message to enter Auto Reply Message mode.

2When you receive an Individual Call, the transceiver will send an automatic response to the caller after

3 seconds, and “GREETING” appears on the display.

•If you are available to receive the call, press any key to cancel the auto response.

29