Emergency Calls
If your transceiver has been programmed with the Emergency function, you can make emergency calls.
1Press and hold the key programmed as Emergency.
•Ask your dealer for the length of time necessary to hold this key before the transceiver enters Emergency mode.
•When the transceiver enters Emergency mode, it will change to the Emergency channel and begin transmitting based on how it is set up by your dealer.
2To exit Emergency mode, press the Emergency key again.
•If the Emergency mode completes a preset number of cycles, Emergency mode will automatically end and the transceiver will return to the zone and channel that was in use before Emergency mode was entered.
Note:
◆Your dealer can set the transceiver to emit a tone when transmitting in Emergency mode.
◆Your dealer can set the transceiver to emit tones and received signals as normal, or mute the speaker during Emergency operation.
Scrambler
Press the key programmed as Scrambler/ Encryption, or access the Menu {page 12}, to switch the transceiver to secure (encrypted) transmission.
•Pressing the PTT switch after the Scrambler function has been turned ON encrypts the transmitted signal.
22