Connecting the System
Connecting Other Accessories (Commercially Available Units)
z When a related system component is connected, read the instruction manual for that component also.
z Ensure that all the cords are securely connected. Loose or incomplete connections may result in noise interference or no sound at all.
Caution for outdoor antenna 
installation
Since antenna installation necessitates skill and experience, always consult your dealer before installation. The antenna should be placed at a distance from the power distribution wires. Otherwise, an electric shock accident may occur if the antenna falls down.
PHONO IN
Connect record players with MM cartridges to the [PHONO IN] terminal on the rear panel of the main unit.
z The [M] (earth) terminal is used to reduce noise reduction when an analog record player is connected to the system. It is not an earth terminal for safety purposes.
zRecord players with
zYou cannot connect a record player with an MC cartridge directly to the main unit. Connect a dedicated equalizer amplifier to the record player and then connect it to the [AUX IN] terminal.
| Signal |
| earth lead |
| Audio OUT |
| Record player |
| (with MM cartridge) |
D.AUDIO |
|
Connect digital audio players to the [D.AUDIO] terminal on |
|
the front panel of the main unit. |
|
z If you connect a Kenwood player that supports digital |
|
audio link using the dedicated cable, you can control the |
|
player from the main unit and the remote control. (P.34) It |
|
can be connected using a 3.5 mm stereo |
|
(commercially available unit). |
|
z When you are not using the digital audio player, unplug | Digital audio player |
the |
|
English 13