Component Names and Functions
Using the remote control
After plugging the main unit into the AC wall outlet, press the power [K] key on the remote control unit to turn the system on.
Once the system is turned on, press the key for the function you want to use.
Point the remote control at the remote sensor when using it.
Approx.
6 mz The remote control may not operate | Approx. 30° | Approx. 30° |
correctly if direct sunlight or light from a |
|
|
|
| |
as an inverter type) is shining on the |
|
|
remote sensor. If this happens, install |
|
|
the main unit in a different location to |
|
|
avoid this sort of malfunction. |
|
|
Loading the remote control batteries
| 1 Remove the | 2 Load the R03 batteries | 3 Close the battery |
| battery cover. | supplied with the system. | cover. |
z Check the polarity of the batteries (U, V) when loading them.
zThe batteries supplied with the system are only for operation checking and may only last for a short time.
zWhen replacing the batteries, always load 2 new batteries.
English 19