Kenwood R-K1000 Messages, Meaning, Displayed Message

Messages

Displayed Message	Meaning
CAN’T SETUP	z The ROOM EQ microphone is not connected.
	RConnect the ROOM EQ microphone. (P.10)
	z Headphones are plugged into the [PHONES] jack.
	RUnplug the headphones.
Non-PCM	The [CD IN (COAX)], [DIGITAL IN 1 (OPT)], [DIGITAL IN 2 (OPT)] or [DIGITAL IN 3
	(COAX)] terminal is receiving non-PCM input singnals. (P.14–16)
R.EQ ERROR1	Measurement failed because the room being measured is too noisy.
	RReduce the amount of ambient noise.
R.EQ ERROR2	Measurement failed because there is no signal input to the microphone.
UNLOCK	The component connected to the [CD IN (COAX)], [DIGITAL IN 1 (OPT)], [DIGITAL IN
	2 (OPT)] or [DIGITAL IN 3 (COAX)] terminal is not turned on. Alternatively, there is
	no signal input. (P.14–16)
––– kHz	The sampling frequency of the input PCM signals is outside the playable range.

62R-K1000