Kenwood R-K1000 Resetting the microcomputer

Troubleshooting

Resetting the microcomputer

	Symptoms	Possible Cause/Solution
	Microcomputer	z Malfunctions may occur due to an external cause or because a
	malfunction (the system
	does not work, the	connection cord was unplugged while the system was turned on.
	does not work, the	Use the procedure below to reset the microcomputer.
	display is faulty, etc.).	Use the procedure below to reset the microcomputer.
	display is faulty, etc.).
		1Unplug the power cord from
		the AC wall outlet.

2Plug the power cord back in while holding down the power [K] key on the main unit.

3When the microcomputer is reset, the display shown on the right appears.

zBear in mind that resetting erases any stored information and restores the system’s default settings.

English 65

Contents

INSTRUCTION MANUAL Declaration of Conformity with regard to the EMC Directive 2004/108/EC Manufacturer: EU Representative’s: Safety Precautions CAUTION Safety Precautions IMPORTANT SAFETY INSTRUCTIONS Read Instructions Retain Instructions Heed Warnings Follow Instructions IMPORTANT SAFETY INSTRUCTIONS 8. Power Cord Protection 9. Lightning 10. Overloading 11. Object and Liquid Entry 19. Outdoor Antenna Grounding What the R-K1000Can Do Supports a host of component types Create the perfect sound space for your installation setting Realistic audio playback with near-originalsound Superb sound quality even at low volumes Contents Accessories Installing the System Notes on installing the system Getting the best acoustic effect Connecting the System Main Connections 1Connecting the AM loop antenna 2Connecting the FM indoor antenna 3Connecting the speakers Connecting the CD Player (DP-K1000– sold separately) 1CD IN (COAX) 2SYSTEM CONTROL Connecting Other Accessories (Commercially Available Units) PHONO IN TAPE IN/OUT AUX IN DIGITAL IN 1, 2 (OPT) DIGITAL IN 3 (COAX) PHONES Main unit Display Remote control Using the remote control Loading the remote control batteries How to Use This Manual Explanations of How to Use This Manual Operation icons Basic Operation Preparations nAdjusting the volume 1Turn the system on (off) 2Select the input source Using CDs (DP-K1000– sold separately) Skipping forward/back Skipping tracks, skipping back, skipping to the start Stopping playback Pausing and resuming playback Procedures by Input Source Receiving Broadcast Stations RDS (Radio Data System) External Components Listening to FM/AM Radio Receiving Broadcast Stations Choosing from stations that are not stored (Auto/Manual tuning) 1Select Auto tuning or Manual tuning AUTO lit AUTO unlit Presetting Stations Automatically (AUTO MEMORY) Presetting Stations Manually (Manual Preset) PS (Program Service) Name Display Searching for a Desired Program Type (PTY Search) External Components Playback from External Components Adjusting the External Component Input Level D.AUDIO Playback from a Digital Audio Player „Operations during digital audio player playback Adjusting the Digital Audio Player Input Level Audio Settings ROOM EQ (Room Equalizer) Digital Sound Equalizer Sound Presets Supreme EX ROOM EQ ROOM EQ (Room Equalizer) 2Place the microphone in the listening position (at ear level) 3Press the [MODE] key 4Select “ROOM EQ” 5Press the [ENTER] key Canceling automatic setup „Temporarily canceling the characteristics set automatically 1Press the [MODE] key 2Press the [A] or [B] key to select “ROOM EQ” 3Press the [ENTER] key Matching the Acoustic Effect to the Conditions Digital Sound Equalizer Adjusting the Range Levels (TONE) Digital Sound Equalizer Adjust the mid tones (MID) level by pressing the [A] or [B] key 7Press the [ENTER] key 9Adjust the high tones (TREBLE) level by pressing the [A] or [B] key 10 Press the [ENTER] key Sound Presets Registering Sound Effects Using Sound Presets Disabling Equalizer Effects (FLAT) Supreme EX Setting Supreme EX Clear Setting Clear A BALANCE Adjusting the Speaker Volume Balance Component Settings Setting the Time …………………………………52 Setting the Timer Display Settings Auto Power Save (A.P.S.) …………………………60 Setting the Time Setting the Timer Setting the Sleep Timer (SLEEP) Setting the Program Timer (PROGRAM) 5Select the day (or days) on which the Program Timer will run 6Select “EVERY WEEK” or “ONETIME” 7Specify the “ON” (start time) setting 8Specify the “OFF” (end time) setting 9Select “PLAY” or “AI PLAY” 10 Select “CLEAR A ON” or “CLEAR A OFF” 11 Set the volume 12 Select the input source 13 Press the power [K] key to turn the power OFF „To cancel (off) or reset (on) the timer Display Settings Setting the Display Brightness (DIMMER) Turning the Display Saver ON/OFF Auto Power Save (A.P.S.) Maintenance Messages …………………………………………62 Troubleshooting …………………………………63 Care and Storage …………………………………66 Specifications ……………………………………67 Messages Troubleshooting Amplifier/Speakers Tuner Components connected to the D.AUDIO terminal Resetting the microcomputer Care and Storage Specifications