Priority Scan
A Priority channel must be programmed in order for Priority Scan to function.
When using a single Priority channel, the transceiver will automatically change to the Priority channel when a call is received on it, even if a call is being received on a normal channel.
When using dual Priority channels, Priority channel 1 is given precedence over Priority channel 2. So, if a call is received on Priority channel 1 while a call is already on Priority channel 2, the transceiver will automatically change to Priority channel 1.
•“P1” appears on the
Scan Revert
The Scan Revert channel is the channel selected when you press the PTT switch to transmit during Scan. Your dealer can program one of the following Scan Revert channels:
•Selected: The last zone and channel selected are assigned as the new revert zone and channel.
•Selected + Talkback: If the zone and channel have been changed during Scan, the newly selected zone and channel are assigned as the new revert zone and channel. The transceiver “talks back” on the current receive channel.
•Priority 1: If your dealer has programmed a Priority 1 channel, this channel is the revert zone and channel.
•Priority 1 + Talkback: If your dealer has programmed a Priority 1 channel, this channel is the revert zone and channel. The transceiver “talks back” on the current receive channel.
•Priority 2: If your dealer has programmed a Priority 2 channel, this channel is the revert zone and channel.
•Priority 2 + Talkback: If your dealer has programmed a Priority 2 channel, this channel is the revert zone and channel. The transceiver “talks back” on the current receive channel.
•Last Called: The last channel on which you made a call is assigned as the new revert channel.
16