Kenwood TK-5910 GRP, Key Delete

Deleting the Encryption Key

1Press the key programmed as Key Delete to enter Encryption Key Delete mode.

2Select the current Encryption key using the GRP and keys or the CH control .

3Press the PF 3 key to delete the Encryption key.

4Press the PF 1 or PF 2 key to exit Encryption Key Delete mode.

Note: To delete all Encryption keys (when more than one key has been set up), select “ALL”.

Password Protection

If the transceiver is password protected, entering an incorrect password successively 15 times will automatically delete all the Encryption keys.

•Turning the transceiver power OFF and the ON again will not reset the number of attempts for entering an incorrect password.

27