Kenwood TK-5910 <TK-5710/ TK-5710H/ TK-5810/ TK-5810Honly, FleetSync: ALPHANUMERIC 2-WAYPAGING FUNCTION, Key, Kenwood, Function

FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION

<TK-5710/ TK-5710H/ TK-5810/ TK-5810H only>

FleetSync is an Alphanumeric 2-way Paging Function, and is a protocol owned by Kenwood Corporation. FleetSync enables a variety of paging functions on your transceiver, some of which depend on dealer programming.

Note: This function is available only in Conventional FM Operation.

Key Functions

Key		Function
Selcall or Selcall + Status		Press to change the transceiver mode as shown in
		the diagram below.
CH control		Rotate to select an ID from the pre-programmed ID
		list or Status list.
PTT switch or PF 4 key		Press to initiate a call.
Keypad 0 ~ 9		Use the DTMF keypad to enter Selcall or Status
		numbers.
PF 3 or DTMF # key		When dialing a number manually, press to delete a
		character or press and hold to delete all characters.
		Press to exit Selcall or Status mode. Press and
		hold to toggle between list selection and manual
PF 2 or DTMF	key	entry (if enabled). In Stack mode, press to toggle
		the display between ID/message, receive channel,
		and time stamp, or to delete the selection.
PF 1 key		Press to exit Selcall or Status mode.

					Normal Operating Mode
					Receive a		Hold Selcall	, Status
	Press Selcall or		Selcall Status		new message		or Selcall	Status
						Press		Press	PF1
						any key
		Selcall Mode		1	New Message		Stack Mode
					Display Mode
			PF2
		Press
Press		Status Mode		2
PF1

1Depending on how your dealer programmed the transceiver, Selcall mode may be skipped or the transceiver may exit Selcall mode automatically (as shown by the dash arrow).

2After entering Selcall mode by pressing the Selcall + Status key, you can enter Status mode by pressing the PF2 key.

19