TRUNKING CALLS
Making a Telephone Call
■Manual Dialing
1Press the key programmed as Autodial.
•The last called unit appears on the display.
•Press the PF 2 key to switch the display between the unit name and the list number.
2Press and hold the PF 2 key to enter Store & Send mode.
3Enter the desired digits using the DTMF keypad.
•Alternatively, you can select a digit by rotating the CH control, and then set the
selected digits by pressing the GRP | key. Repeat this process to enter the |
entire number. |
|
4Press the PTT switch to make the call.
•Alternatively, you can press the PF 4 key to page the selected unit, rather than making a call.
■Selecting a Number from the List
1Press the key programmed as Autodial.
•The last called unit appears on the display.
•Press the PF 2 key to switch the display between the unit name and the list number.
2Rotate the CH control to select your desired list number.
3Press the PTT switch to make the call.
•Alternatively, you can press the PF 4 key to page the selected unit, rather than making a call.
Receiving a Telephone Call
1When a call is received, a ringing tone will sound and “PHONE CALL” will appear on the display.
2Press and hold the PTT switch to speak, and release it to receive.
• Only one person can speak at a time.
Making a Status Call
1Select your desired zone and channel.
2Press the key programmed as Status to enter status mode.
3Rotate the CH control to select the status ID you want to transmit.
4Press the PTT switch or the PF 4 key to initiate the Status call.
•After the status call has been successfully received by the called unit, “COMPLETE” appears on the display.
24