Scan Programming <TK-5710/ TK-5710H/ TK-5810/ TK-5810H only>
Note: Scan programming is only available when using Conventional operation.
■Conventional Operation
If Scan Type has been programmed for Conventional operation, you are able to reprogram your scan list.
1Press the key programmed as Scan Program.
•The 
2Press the GRP 
and 
keys or rotate the CH control to select the zone and channel you will add to or remove from the Scan list.
•Press the PF 2 key to toggle between Zone Select and Channel Select.
3Press the PF 4 key to add or remove the selected zone or channel to/ from the scan list.
•The zone add indicator 
/ 
)/
channel add indicator 
/ 
) will appear on the display when the selected channel is added to the scan sequence.
4Press the PF 1 key to exit scan programming.
If the Priority channel has been set as Operator Selectable by your dealer, you are able to reprogram the Priority mode as well.
1Press the key programmed as Scan Program.
•The 
2Press and hold the PF 3 key to edit the Priority channel.
3Press the GRP 
and 
keys or rotate the CH control to select the channel you will set or unset as Priority.
4Press the PF 4 key to toggle the selected channel between Priority and Normal.
•“P1”, “P2”, or “PP” appears on the
5Press the PF 3 key again to set the new channel setting.
6Press the PF 1 key to exit scan programming.
17