nPower Cable Connection
In order to use this transceiver for fixed station operation, you will need a separate 13.8 V DC power supply that must be purchased separately. The recommended current capacity of the power supply is 13 A.
Note: Do not plug the DC power supply into an AC outlet until you make all connections.
Fuse holder (E type)
Black
Fuse holder
(K, M4 types)
Red (+) |
|
cable | Fuse holder |
| (K, M4 types) |
Regulated DC power supply
Fuse holder
(E type)
DC power cable
1Ensure that the transceiver and DC power supply are both OFF.
2Connect the DC power cable to the regulated DC power supply and ensure that the polarities are correct (Red: positive, Black: negative).
•Use the supplied DC power cable to connect the transceiver to a regulated power supply. Do not directly connect the transceiver to an AC outlet.
•Do not substitute the cable with smaller gauge wires.
3Connect the DC power cable to the transceiver.
•Press the connectors firmly together until the locking tab clicks.
Note: For your transceiver to fully exhibit its performance capabilities, we recommend using an optional