Kenwood TM-D710A, TM-D710E OPTIONS, Memory control program MCP-2A, nUsing the MCP-2ASoftware

OPTIONS

The following options are available for use with this transceiver:

•	MC-45	Microphone	•	PG-5A	Data Cable
•	MC-59	Microphone with keypad	•	PG-5G	Programming Interface Cable
•	MCP-2A	Memory Control Program			(2 m)
		(web download software)	•	PG-5H	PC Interface Cable Kit (2 m)
•	MJ-88	Microphone Plug Adapter	•	PG-5F	Extension Cable Kit (4 m)
•	MJ-89	Modular Plug Microphone	•	PS-33	DC Power Supply
		Switch	•	PS-53	DC Power Supply
•	PG-2N	DC Cable (2 m)
			•	SP-50B	External Speaker
•	PG-20	DC Cable (7 m)
			•	VGS-1	Voice Guide & Storage Unit
•	PG-3B	Noise Filter

Note: Optional accessories for use with this transceiver may change, post-production. (New options may become available and/or current options may be discontinued.) Please refer to the options catalog(s) for applicable transceivers.

Memory control program MCP-2A

The following functions can be set only by using the MCP-2A software:

•SQC active condition

•Microphone sensitivity level

•10 MHz mode selection

•Power on password value

Using the MCP-2A software, you can:

•View memory channel groups

•Name memory groups

•Name PM channels

•Save/load settings

•Read exported TravelPlus for Repeaters™ files issued from the ARRL™ (There are some version restrictions; refer to the help text of the MCP-2A.)

•Print/export memory and various settings in html

(TravelPlus for Repeaters is a trademark of ARRL.)

To download the MCP-2A software, go to: http://www.kenwood.com/i/products/info/amateur/software_download.html

Note: This URL may change without notice.

nUsing the MCP-2A Software

1 Follow the directions of the installer to install the software.

2 Set up the PC COM port and baud rate.

3 The transceiver data is read from the MCP-2A software.

4 Select your desired settings, then write the data to the transceiver.

36