*(77,1*$&48$,17('

ABCD

EF

Appears when the VOX (Voice Operated Transmission) function is ON or the Break-in function is ON for CW mode {page 30}.

Appears when the Frequency Lock function is ON {page 53}.

Appears when the Speech Processor function is ON {page 31}.

Appears when the constant recording function is ON {page 60}.

Reserved for future updates.

Appears when the selected Menu No. is in the Quick Menu list {page 14}. It also appears when the transceiver is scanning the frequencies between the slow down frequency points {page 47}.

Appears when Receive Incremental Tuning function is ON {page 29}.

Appears when Transmit Incremental Tuning function is ON {page 31}.

—— F ——

(Main DIsplay)

In normal operating mode and various configuration modes, it displays the transceiver operating frequency. In Menu mode, it displays the various menus, and in Adjustment mode, it displays the adjustment values.

(Sub-display)

When recalling a memory channel, it displays the Memory Channel name (if one has been programmed). During split frequency operation, it displays the frequency. When the following indications occur simultaneously, information is displayed in the following order: RIT/XIT frequency, Split frequency, Memory Name. In Menu mode, it displays a menu title. In other modes, it displays the configuration parameters.

Appears when the split-frequency operation is ON {page 24}.

“” appears while VFO A is selected. “ ” appears while transmitting on a split channel in VFO A {page 10}. “” appears while Menu A is being accessed in Menu mode {page 14}.

—— E ——

Appears when the RX ANT terminal is enabled {page 50}.

Either “ ” or “ ” appears, depending on which antenna connector is selected {page 50}.

“ ” appears while the internal antenna tuner

{page 61} is in-line for operation. “ ” appears while receiving when the internal antenna tuner is in-line for operation. “ ” and “ ” blink while tuning is in progress {page 50}.

“” appears while VFO B is selected. “ ” appears while transmitting on a split channel in VFO B {page 10}. “” appears while Menu B is being accessed in Menu mode {page 14}.

“” appears while a simplex memory channel

is selected. “ ” appears while a split memory channel is selected {page 41}.

Appears when the DRV terminal is enabled {page 50}.

8