21
4.7. Windows Firewall Settings
With the host station PC, receiving connections from networks and the internet using the
ARHP-990 and ARVP-10 are blocked by the Windows firewall. When blocked, KNS
operations are disabled, so remove the block.
Reference:
Add the ARHP-990 and ARVP-10H to "exceptions" using the Windows firewall settings,
to release the block.
4.8. Comprehensive Security Software Settings
If using comprehensive security software, it is necessary to adjust the settings so that
ARHP-990, ARCP-990 and ARVP-10 communications are not blocked. Perform the
settings with reference to the user manual for the comprehensive security software used.
4.9. Making the Host Station Connection Request Wait Mode
Click the "Connect" button in the main window of the ARHP-990 on the host station. The
indicator will light yellow and the host station will enter connection request wait mode.
If you are using the ARVP-10 as a VoIP Program, click the "Online" button in the main
window of the ARVP-10H on the host station. The notation of the "Online" button changes
to "Offline" and the host station will enter connection request wait mode.
4.10. Connecting to the Host Station from the Remote Station
Click the "Connect" button in the main window of the ARCP-990 on the remote station. If
the connection to the host station is successful, the indicator will light green. After the
pop-up message of display updating has disappeared, you can start operation.
If you are using the ARVP-10 as a VoIP Program, click the "Connect" button in the main
window of the ARVP-10R on the remote station. If the connection to the host station is
successful, the indicators will light green and red.