25
Question
Answer
Installation
I want to use a USB headset or
Bluetooth headset on the
remote station PC. Will there be
any problems?
You can use them, but in principle, a
USB headset or Bluetooth headset
has unavoidable delays, so entering
standby will take considerable time.
If the delays are a problem, it is
better to avoid using them.
After connecting a USB headset or
Bluetooth headset, you must set the
default recording and playback
devices using the Windows sound
settings. For details, refer to the
USB headset or Bluetooth headset
user manual.
Connection
Cannot operate the transceiver.
Cannot connect to the host
station.
Check the environment of the PC at
the remote station.
・ Select "KNS (KENWOOD
NETWORK COMMAND
SYSTEM) (ARHP-990)" from
"Settings" in the "Tool" menu on
the ARCP-990, and click
"Settings".
If the choice of the IP address is
blank, the IP address has not
been able to be obtained. Check
that the network devices are
working properly.
・ If the choice of the IP address
has several selections, select
the IP address that is used to
connect to the network.
Check the environment of the PC at
the host station.
・ Select "Configure KNS" from the
"Tool" menu on the ARHP-990.
If the choice of the IP address is
blank, the IP address has not
been able to be obtained. Check
that the network devices are
working properly.
・ If the choice of the IP address
has several selections, select
the IP address that is used to
connect to the network.