31
Question
Answer
Other
After implementing KNS operations
on the PC used as the host station,
the sound has vanished from the
PC during audio and video
playback on the PC.
It is possible that the device connected
to the TS-990S has been selected as
the default device using the Windows
sound settings.
Use the Windows sound settings to
check whether the PC speakers have
been selected as the default playback
device.
When the TS-990 is not used, we
recommend you disconnect the USB
cable from the PC.
When playing audio and video
when implementing KNS operations
on the PC used as the host station,
the audio is transmitted from the
TS-990S.
During KNS operations, all audio output
from the PC is input to the TS-990S as
transmitted audio.
During KNS operations, do not play
audio or video. Furthermore, we
recommend terminating other
programs.
Loud sounds are suddenly output
from the host station transceiver.
The cause is the remote station user
operating the volume control.
You can use the ARHP-990 to prohibit
volume operations from the remote
station.
Select the "Tool" menu and the "Setup",
and enable the "Prohibit AF gain control
from ARCP-990" checkbox.
After restarting the host station for
any reason, are there any settings
to enable standby mode
automatically?
In the ARHP-990 "Tool" menu, select
"Setup", and then enable the "Run
automatically at Windows startup"
checkbox.
When the PC is restarted, it will
automatically enter standby mode.
What is the number of the TCP port
when the KNS is operated within a
home LAN area.
It is fixed at 60000.