APPENDIX

TS-B2000 FRONT PANEL

RESET

5

PHONES

HF/VHF/UHF/ALL MODE MULTI BANDER TS-B2000

4

MIC

3

1 2

q [ ] (POWER) switch

Press and hold briefly to switch the transceiver power ON. Press again to switch the power OFF.

wPower indicator

While the transceiver is turned ON, it lights red.

eMIC connector

Connect a compatible microphone to this connector, then securely screw down the connector locking ring {page 3}.

rPHONES jack

Connect a set of headphones to this jack. Inserting a plug into the jack automatically mutes the audio from the speaker {page 3}.

tRESET button

Push this switch to reset the microprocessor in the transceiver. This sets all the contents of the memory function to the factory default values.

DIGITAL

SIGNAL PROCESSOR

109